-40%
EVERCOAT 416 METAL GLAZE POLYESTER FINISHING AND BLENDING PUTTY (QUART)

EVERCOAT 416 METAL GLAZE POLYESTER FINISHING AND BLENDING PUTTY (QUART)

$ 22.44

Availability: 544 in stock
  • Brand: Evercoat
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • Restocking Fee: 15%
  • Returns Accepted: Returns Accepted
  • Country/Region of Manufacture: Unknown
  • Manufacturer Part Number: 416
  • Warranty: Yes
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer

    Description

    EVERCOAT 416 METAL GLAZE POLYESTER FINISHING AND BLENDING PUTTY (QUART)
    METAL GLAZE  is a two-part polyester finishing and blending putty. It can be used independently or intermixed with other METALWORKS products to enhance the working properties for adapting to various temperatures and working conditions. It offers superior adhesion to galvanized metal, metal, aluminum, body filler, wood, fiberglass, catalyzed primers and aged/sanded OEM topcoats.
    USES:
    Use as a finish coat over body filler repair areas to fill minor defects, deep sand scratches and pinholes prior to applying primer surfacer to improve the efficiency of the primer coat. Can also be used to fill minor body damage up to 1/8” in depth.
    APPROVED SUBSTRATES:
    Steel, Galvanized and other zinc coated steel, and most rigid to semi-rigid fiberglass and thermo set plastics. For flexible plastics, use POLY-FLEX™ Flexible Polyester Glazing Putty.
    PREPARATION:
    Clean surface. Remove all dirt, oil grease and wax. Use an 80—180 grit disc to remove or scuff paint. Surface must be completely dry before application.
    MIXING:
    Place desired amount of putty on a clean, non-fibrous mixing board. Add a ribbon of cream hardener from edge to edge across the center of dispensed putty. Puddles larger than 4” in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 5-6 minutes @ 75 to 80F (27C).
    APPLICATION:
    Spread a thin layer of mixed material over surface using firm pressure to ensure best adhesion. Apply additional layers building area slightly higher than the surface to allow for sanding. Do not apply over fresh or uncured coatings.
    FINISH:
    Sandable in approximately 20 minutes. Sand hardened putty with 180-220 grit sandpaper followed by 320 grit, if desired.
    YOU WILL RECEIVE 1 QUART OF EVERCOAT METAL GLAZE WITH 1 TUBE OF BLUE HARDENER.
    FREE SHIPPING TO THE LOWER 48 STATES
    PROVISION Auto Body Supply
    Providing Quality to Professionals. Buy with confidence.