502 FINISHING FINE-GRAIN PUTTY 1.2 quart & hardener +FREE Metal Spreaders (4)

Description

Chamäleon
502 FINISHING FINE-GRAINED PUTTY
& Hardener tube
+FREE Stainless Steel Spreader Set (4 Sizes)!
FREE SHIPPING!
502 FINISHING FINE-GRAINED PUTTY
Used for correction of small defects of all kinds of surfaces, light dimples, pores and grinding marks
Has a high degree of adhesion to different materials
Provides a very smooth surface
High elasticity
White color
Made in Germany
1800kg / 1.2 quart
General characteristics:
For the filling of small uneven nesses and for the
"fine-filling" of pre-treated surfaces. Applicable
on galvanized sheets, aluminum
and  its alloys,
iron, steel plates, wood, concrete air spots which
are filled with Chamaeleon Universal
medium-grained Polyester Putty. The quick
curing allows to work on shortly after. Micro-fine
filling components result in a very smooth
surface.
Quality and properties:
Composition of highly-reactive, unsaturated
polyester resin, filled with a new, micro-fine
pigment-filler-combination
Results in a very smooth surface
Ease of working
Easy to sand
Very good adhesion
Free of asbestos and silicone
Short curing time allows to work on shortly after
Resistant to weak acids and bases, propellants,
solvents, water and de-icing salt
Technical characteristics:
Basis: polyester resin with a pigment-filler-combination
Color: white
Smell: styrene
Consistence: soft, thixotropic, pasty
Pot life / Working time at 20°C: approx. 4 minutes
Working temperature: min. 12°C
Drying time (at 20°C, 50%
relative air humidity): can be sanded after approx.20- 30 minutes
Flash point: approx. 33°C (resin); not applicable for hardener
Density at 20°C: putty 1.7 g/cm³
hardener 1.15 g/cm³
Addition of hardener: 2 - 4 % (optimal mixture 2,5 %)
Temperature resistance of the
cured material: 120°C
Application:
Before use, carefully read and observe the warning texts on the label!
The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.
Take the requested portion of putty compound out of the can and mix it well with the
corresponding quantity of hardener.
Apply the mixed material in the desired layer thickness. If necessary sand with wet sand
paper (grain400)
Clean tools immediately after use, if necessary with a nitro thinner.
Do not return mixed material into the can.
After approx. 30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.
Already after one-time sanding with wet sand paper (400) it is possible to apply the paint.
Chamaeleon Fine-grained Polyester Finishing Putty is very elastic and constantly easy to
sand.